How To: Make a mini uzi out of paper

Learn to make this easy mini paper Uzi gun for gaming with your friends! Supplies: Scissors, Scotch tape (Note: DO NOT USE MASKING TAPE OR DUCT TAPE; IT WILL NOT TURN OUT WELL), lots of paper. 1. Take one piece of paper and roll it up from top to bottom to make a short tube. Tape it. 2. Take another sheet of paper and do the exact same thing that you did to the first one and tape it as well. 3. Take a sheet of paper and roll it up from side to side (long ways). Make the hole in the middle about the same size as the other tubes. 4. Place the longer tube in between the two smaller tubes making sure they are lined up at the bottom, and then tape them all together on both sides. 5. Cut down the longer tube about just under half an inch with the scissors, trying to maintain a straight cut. DO NOT CUT IT EVEN WITH THE OTHER TWO. 6. Take a separate sheet of paper, facing it (top to bottom) and put the tubes on top of it sideways, with the uneven middle bottom of the tubes sticking out. Roll it carefully and tightly, then tape it shut. You should be able to see the bottom of the longest tube sticking out. 7. "Pinch" or crease the rounded edges until they look square on the top and bottom of each side of the paper covering the tubes. 8. Tape the covering paper to the tubes for better stability. END PART ONE OF THE PAPER UZI GUN TUTORIAL; STAY TUNED FOR CONTINUING TUTORIALS TO LEARN HOW TO FINISH THIS COOL PAPER GUN!